Mp3378e Protection Pin Upd [work] ✓

The MP3378E includes several built-in safety mechanisms for both the WLED controller and the buck converter: Protection Type Mechanism / Details

| Symptom | Likely cause | Fix | |---------|--------------|-----| | Driver latches off permanently | PRO low + fault occurred | Cycle VCC or pull PRO high | | Driver keeps restarting every ~1s | PRO high + intermittent fault | Check LEDs, OVP resistor, or set PRO low | | Boost works only above 4.5V | UVLO enabled, no UPD | Enable UPD if low-VIN needed, else raise input | | No start-up at low VIN with UPD enabled | Input current limit tripped | Reduce load or add soft-start | mp3378e protection pin upd