: Place the chip in the ZIF socket (pin 1 near the handle) and click Auto to begin the full programming sequence. Troubleshooting Tips
This software is designed for speed and ease of use in educational and hobbyist embedded systems projects. willar programmer software for windows 10 install
: Download the standalone WLPRO application (often wlpro_v220_setup.rar ) and the appropriate USB-to-Serial drivers, such as the Prolific PL2303 or CH340 driver, depending on your hardware revision. : Place the chip in the ZIF socket
To install the Willar Programmer software on Windows 10, follow these standard procedural steps: To install the Willar Programmer software on Windows
Willar software typically only detects programmers on low-numbered COM ports (usually COM1 to COM9 NSK Electronics Device Manager and expand Ports (COM & LPT) Right-click your programmer's port and select Properties Port Settings Change the COM Port Number to an available single-digit number (e.g., COM3) NSK Electronics Step 3: Run the Software
