The following parameters define the core performance of the HW133V10:
The V10 revision is optimized for a continuous output current of up to 10A, with peak surge protection mechanisms to prevent component failure during "in-rush" periods.
There is no widely documented or standard industry product under the model number in public technical databases or major manufacturer catalogs.
He turned the voltage to 5.0V.
He slammed the power switch. Nothing happened. The switch was already off.
| Pin # | Symbol | Function (Standard) | | |-------|--------|---------------------|-------------------------------| | 1 | VIN | 6.5V – 28V Input | Extended slew-rate capacitor enable | | 2 | EN | Enable (Active High) | Soft-start timing modulation | | 3 | GND | Power ground | Thermal pad sensing (Kelvin connection) | | 4 | SW | Switching node | Spread spectrum clock output | | 5 | VOUT | 1.0V – 3.3V output | Load transient pre-emphasis | | 6 | FB | Feedback input | Exclusive: Adaptive loop compensation | | 7 | COMP | Compensation pin | External sync input (up to 2.2MHz) | | 8 | SS/TRK | Soft-start/Tracking | Exclusive: Current limit droop control | | 9* | NC | Not connected | Thermal warning flag (open-drain) | | 10* | NC | Not connected | +2.5V reference output (10mA max) |
The following parameters define the core performance of the HW133V10:
The V10 revision is optimized for a continuous output current of up to 10A, with peak surge protection mechanisms to prevent component failure during "in-rush" periods. hw133v10 datasheet exclusive
There is no widely documented or standard industry product under the model number in public technical databases or major manufacturer catalogs. The following parameters define the core performance of
He turned the voltage to 5.0V.
He slammed the power switch. Nothing happened. The switch was already off. He slammed the power switch
| Pin # | Symbol | Function (Standard) | | |-------|--------|---------------------|-------------------------------| | 1 | VIN | 6.5V – 28V Input | Extended slew-rate capacitor enable | | 2 | EN | Enable (Active High) | Soft-start timing modulation | | 3 | GND | Power ground | Thermal pad sensing (Kelvin connection) | | 4 | SW | Switching node | Spread spectrum clock output | | 5 | VOUT | 1.0V – 3.3V output | Load transient pre-emphasis | | 6 | FB | Feedback input | Exclusive: Adaptive loop compensation | | 7 | COMP | Compensation pin | External sync input (up to 2.2MHz) | | 8 | SS/TRK | Soft-start/Tracking | Exclusive: Current limit droop control | | 9* | NC | Not connected | Thermal warning flag (open-drain) | | 10* | NC | Not connected | +2.5V reference output (10mA max) |