: In standby mode, press and hold the IR button (often labeled as Button 2) for about 4 seconds to activate the infrared LEDs for low-light filming . Specifications & Features Resolution HD 1280x1024 pixels Storage Supports TF/microSD cards up to 32GB Format Saves video in AVI format Special Features Motion detection, night vision (IR), and PC camera mode Time and Date Calibration
Do not charge for more than three hours at a time, as overcharging can damage the internal battery. spy-world.net 2. Powering On (Standby Mode) To wake the camera up: Press and hold the Unlock button (the top button) for three seconds Ccd S820 Manual
: Press and hold the Unlock/Power button for approximately three seconds. A red light should turn on, indicating the device is in Standby Mode. Operating Instructions Light Indicator Record Video In Standby, press the Video/Record button once. Red light flashes then goes out (recording starts). Stop Recording Press the Video/Record button once. Red light stays on (returns to Standby). Night Vision In Standby or Recording, press the Night Vision button . Indicators may vary; check for infrared activation. Motion Detection : In standby mode, press and hold the
: Press the dedicated Detection button. The blue light will flash when movement is detected, triggering automatic recording . Powering On (Standby Mode) To wake the camera
: Approximately 80 to 100 minutes on a full charge.
The "CCD S820" is often a generic label. Many factories in China produced these under different brand names (e.g., Vivitar, Praktica, or generic "Digital Camera" branding). Therefore, the Ccd S820 manual applies to a family of similar devices, not just a single brand.