Ivoclar Programat P90 Manual Fixed ^hot^ ✓

:

: The T-value (high temperature) is lower than the actual temperature currently in the firing chamber. ivoclar programat p90 manual fixed

The keypad allows for direct selection of all firing parameters. Begins the selected program. STOP (Red Key): : : The T-value (high temperature) is lower

: These typically indicate control unit defects. A common fix is to switch the unit off, leave the furnace open for several minutes, and then restart. Critical Maintenance and Calibration the following service procedures were performed:

To correct the issue, the following service procedures were performed: