Xstabl: Software

One of the most common criticisms of stability software is that it consumes the very resources it’s trying to protect. Xstabl Software solves this via a "passive ring-zero observer"—a lightweight kernel driver that uses less than 0.5% CPU and 30MB of RAM. You will not know it is running until it prevents a catastrophic freeze.

It runs on almost any standard PC with minimal RAM requirements, making it perfect for field laptops or older workstations. Official Recognition:

5/10 (As a modern tool). It remains historically significant and mathematically sound, but the user experience is obsolete compared to contemporary geotechnical software.

For detailed technical guidance, you can refer to the official XSTABL Reference Manual

XSTABL supports both static and dynamic analysis, enabling users to assess how structures respond to different types of loads, including wind, seismic activity, and more.

series of programs, which were originally developed at Purdue University. It allows engineers to: Evaluate Factor of Safety (FOS):

What is it?

A mixture of coding education, Augmented Reality and live performance in an immersive storytelling experience.
An ordinary Year 5 assembly is interrupted by the arrival of Undersecretary Quill, asking for their help. This begins a Ghost Hunter apprenticeship, a series of four coding challenges given to them by Professor Bray. They stress thinking like a programmer – learning to read and debug code, think about the steps of an algorithm, and basic logic structures – through coding their ghost detector in Make Code.
Two weeks later, they explore a haunted Battersea Arts Centre in an immersive live performance. The show is structured like an investigation: Students split into teams, studying artifacts for clues and going out into ‘the field,’ using their devices to find evidence of the spirit's activity.
With the evidence they uncover, students learned about the building's history, who the ghost is and why she is haunting it, unmask a villain, find a stolen a necklace, clear the ghost's name and set her free.
The Digital Ghost Hunt was featured in Immersive Arcade's Best of British since 2001.

The Story

The Digital Ghost begins when a normal school assembly was interrupted by Deputy Undersecretary Quill from the Ministry of Real Paranormal Hygiene, there to recruit the school’s Year 5 class into the Department’s Ghost Removal Section. She tells them it’s due to their unique ability to see and interact with ghostly spirits.

Under the tutelage of Deputy Undersecretary Quill and Professor Bray, the Ministry’s chief scientist, the young ghost hunters must track down the Battersea Arts Centre ghost by learning how to program their own paranormal detectors. Their devices – made from two microcomputers, a Raspberry Pi and a Micro:bit – allow the children to identify objects and locations touched by the ghost. Each has different capabilities, forcing the classmates to work together to discover ghostly traces, translate Morse code using flickering lights and find messages left in ectoplasm, or ultraviolet paint. Meanwhile, the ghost communicates through a mixture of traditional theatrical effects and the poltergeist potential of smart home technology. Together, the pupils unravel the mystery of the ghost's haunting and help to set it free. xstabl software

Notable Hauntings

The Battersea Arts Centre

A scratch of The Digital Ghost Hunt was performed at the Battersea Arts Centre in November, 2018, funded by the Arts & Humanities Research Council's Next Generation of Immersive Experiences program.

York Theatre Royal

The project was given further funding from the AHRC for impact & engagement in 2019 to adapt the show into a family experience, in collaboration with Pilot Theatre. A limited, sold-out run of the show premiered at the York Theatre Royal's 275th anniversary in August 2019.

The Garden Museum

On All Souls Day 2019 the project performed a museum-late experience in partnership with the Garden Museum in London. This new format sent young ghost hunters up a medieveal clocktower and digging for clues in the gardens of the 14th century St. Mary at Lambeth church.

The SEEK Ghost Detector

The SEEK Ghost Detector is a Micro:bit connected to a DecaWave DWM1001-DEV Ultra wideband radio, housed in a custom designed laser cut shell. The Micro:bit served as an accessible controller that students can program. By using Ultra-wideband Radio for indoor positioning, we leaving ghostly trails in Mixed Reality (MR) space for the students to find and interpret. There were four different detector types, all with different functions: detecting ghostly energy, translating Morse code when the ghost flashed the lights, and translating signs left by the ghost in Ultraviolet Ectoplasm.

The custom library that the students used to program their Micro:bits was written in MakeCode and C++ (available on Github.) An earlier mark 1 detector that used a Raspberry Pi was written in Python 3 (available in the Ghosthunter library on Github)

Characters

Deputy Undersecretary Quill

Louisa Hollway

Professor Bray

Hemi Yeroham

Building Manager Michael DeSouza

Michael Cusick

The ghost of Molly Perkins

Angela Clerkin

Junior Agents

Dan de la Motte

Amaarah Roze

Lauren-Deanna Meredith-Stubbs

Ndabane Emmanuel Makula

A message from Prof. Bray

It runs on almost any standard PC with minimal RAM requirements, making it perfect for field laptops or older workstations. Official Recognition:

5/10 (As a modern tool). It remains historically significant and mathematically sound, but the user experience is obsolete compared to contemporary geotechnical software.

For detailed technical guidance, you can refer to the official XSTABL Reference Manual

XSTABL supports both static and dynamic analysis, enabling users to assess how structures respond to different types of loads, including wind, seismic activity, and more.

series of programs, which were originally developed at Purdue University. It allows engineers to: Evaluate Factor of Safety (FOS):

kings-logo-red.svg